MultiInspector free download, MultiInspector download on software download

MultiTrack Spectrum Analyzer. MultiInspector extends the usage of spectrum analyzers especially in multitrack environments by providing an easy way for simultaneous spectral analysis of several audio signals.The first instance of MultiInspector behaves like a standard spectral analyzer. Additional instances automatically send their spectral analysis result to all other instances of MultiInspector. By default, every editor window of MultiInspector shows the same content, but there are numerous options for customizing the display content so that different views of the audio signals can be achieved. After opening all necessary plug-in instances it is sufficient to leave just the editor windows open you really need.MultiInspector provides an FFT mode for spectral analysis with several options for FFT size and window selection. There are different viewing modes for overlapping and stacked display.In addition to the FFT mode, MultiInspector incorporates a standard third octave frequency analyzer. The center frequencies of the bands are based on the ISO 266:1997 standard (20 Hz to 20 kHz). Pink noise will appear flat in the frequency spectrum with the default slope setting of 3 dB per octave. MultiInspector contains a switchable high resolution mode for low frequency bands. Depending on the viewing mode the height and width of the level bars are adjusted according to the current number of signals that are selected for display.Besides the multi-instance functionality, you can still use MultiInspector as a "normal" spectrum analyzer by just pressing the solo button of the current instance.MultiInspector supports up to 16 instances at any sample rate from 32 kHz up to 192 kHz. Here are some key features of "MultiInspector": · FFT and 31 band third octave frequency analyzer showing the spectral analysis of other plug-in instances in the same window. · Independent editor windows for different views of the same content. · Different viewing modes for horizontal and vertical alignment/spacing. · FFT sizes from 512 to 16384 samples. · FFT window options: Rectangular, Hann, Hamming, Blackman, Blackman-Harris, Flat Top. · Switchable semi-transparent display of the FFT curves for easy detection of overlapping frequency ranges. · Resolution options for FFT mode: Full, Fractions of octaves (1, 1/2, 1/3, ..., 1/9, 2/3, 3/4). · Level bar display automatically adapts to the number of signals currently viewed. · Adjustable color for every signal. · Adjustable attack and release time for smooth level bar display. · Adjustable slope with a default of 3 dB per octave for flat display of pink noise (third octave mode) · Peak option and peak hold mode. · Average mode. · Solo/mute for signal selection. · 8 memory slots per signal in every editor window (8 x 16 memory slots per window). · Up to 16 instances. · VST 2.4 compatible. · Sample rates from 32 kHz up to 192 kHz. Requirements: · VST or AU compatible host software. Limitations: · MultiInspector is fully functional at 44.1 kHz sample rate for 60 minutes (can be reloaded instantly). Loading of presets is disabled (preset saving is supported). What's New in This Release: · The GUI can now be resized to show only the frequency display. · Compatibility with the fxpansion VST-RTAS adapter for use in ProTools.

MultiInspector Related Software