BRU Server free download, BRU Server download on software download

A client/server backup and restore system. BRU Server is a native OS X client/server backup tool. Based on the venerable BRU backup engine known for its reliability, BRU Server supports two networked systems to the largest of client/server topologies. Client software is available to provide heterogeneous platform support. BRU Server properly backs up and restores all OS X filesystem attributes.BRU solutions have been the high water mark of reliable UNIX backup for 18+ years, and Mac OS X users can now benefit from this experience. Here are some key features of "BRU Server": Operational: · Native Mac OS X client/server backup software. · Supports Mac OS X and OS X Server 10.3 and newer. · Supports disk-to-disk, disk-to-tape, and disk-to-disk-to-tape backup strategies. · Straightforward installation; client systems and tape devices are automatically recognized and configured. · Intuitive user interface that adheres to the Aqua interface standard provides point-and-click operation to the rich feature set. · Fully scriptable from the command line. · Character-based and graphical management consoles provide local and remote control. · Headless backup and restore operations can be managed via telnet or ssh sessions. · Flexibility to define how the backup operation should be performed because very few sites have the same backup requirements. · Remote log-in and administration. Performance: · Industry's shortest backup window (fully verified backups) by using Data Staging and out-of-band (Anytime Verify) data verification. · Low overhead allows multiple BRU processes to write to multiple storage devices simultaneously with very little impact on system performance. · Pulls data off Xserve RAID (2GB/Fibre) in excess of 130 MB/second. · The most modern tape drives can be streamed. · Intelligent cataloguing provides a powerful query capability to quickly recover select files contained on tape. · Client system backups are not interleaved, thereby further shortening the time to restore selected files. Reliability: · Ultra-reliable BRU engine delivers industry-leading data protection reliability and ultimate restorability of the protected data. · Backups can be 100% verified without access to the original filesystems. · Anytime Verify and Inspect Mode backup verification options can be run as an out-of-band process, freeing up the server faster. · Broad compatibility - backups can be verified on a different system, and even on a different platform. · Backups can be committed to a disk staging area at primary storage subsystem performance levels - virtually eliminating perceived backup windows at the client system level. · Proven data restorability of BRU technology - corrupt data is reported, circumvented, and the restore continues unless the tape drive is physically unable to proceed. · Catalogs copied to tape in addition to the server HDD to provide enhanced availability to backup data should the server system HDD fail. Functionality: · Highly scalable. · Protects data on systems intermittently-attached to the network. · Provides broadest Mac OS X tape library support available. · Lights-out, automated backup operations are scheduled from the user interface. · Full support for mach-o or CFM single file binaries and their resource fork and finder information, as well as full UNIX-based compatibility. · Handles files and permissions skipped by other Mac OS X backup utilities. · Properly backs up so-called "open files" under Mac OS X. · Full support of case sensitivity under the HFS+ filesystem. · Fully compatible with Panther's FileVault feature. · Single archives of any size can be created. · There is no limitation to the size of the catalogs. · Data can be restored from any BRU backup data set without dependence on any special files contained on the server hard disk. · Transport layer agnostic - whether Fibre Channel, SCSI, iSCSI, Gigabit Ethernet, Wireless LAN, etc. · Provides data backup and restore services within NAS, SAN and wireless environments. · QFA (Quick File Access) provides fast access to files contained on tape. · Client system data is not interleaved with other client system data. · Client-side data encryption provides secure communication between client systems and the server. · Network traffic data compression is configurable and can provide better utilization of available network bandwidth. · Pre and post scripts may be run on a client system to freeze the state of a database running on that machine or export its state to an intermediate file. · Files and directories can be excluded from the backup from the client system (excluding mp3 files, for example). · E-mail notification of all operations including interact requirements and job status. · Server is localization friendly. · Integrates with Apple's Xsan technology. Requirements: · Minimum Requirements: G3 500Mhz or better Processor; Recommended: 1 GHz G4. · Minimum Requirements: 256 MB RAM; Recommended: 512MB RAM. · Minimum Requirements: All transport layers are supported (SCSI, Fibre-Channel, USB, and Firewire). · Recommended System: ATTO Technologies UL3 or UL4 SCSI HBA (for SCSI Tapes/Libraries). · Recommended System: ATTO Technologies Celerity FC HBA (for Fibre-Channel Tapes/Libraries) or a FC switch if using Apple FC HBA. · Recommended System: BRU Server, 55 MB of disk for full install (server software, user interface, server agent). · Recommended System: 15 MB of disk on client systems. · Recommended System: 3 MB of disk space for catalogs on the server per 100,000 files backed up. · Recommended System: Disk staging: disk requirement defined by administrator. · Network Requirements: BRU Server requires ports 14441 to 14450 open for bi-directional TCP traffic. Limitations: · 30 days trial period. What's New in This Release: · Fixes Config tool login authentication issues on OS X Snow Leopard · Now uses launchd for startup at system boot for Tiger through Snow Leopard (StartupItems is still used on 10.3.9) · Is now fully compatible with Full Keyboard Access on OS X and Linux · Resolves possible issue with saving license information · Resolves an issue that caused the server daemon to not restart after a hardware scan if the daemon was running when you elected to perform the scan. License entry has been extended to allow copy and paste of the non-separated license string. To use this, select the entire license string that you received and paste it into the "Registered User" field on the License dialog. The string will look like this on your license card or email: · AAAA-BBBB-CCCC-DDDD-EEEE-FFF-GG-HHH-IIIII:090909:8271-0000:BSRV1:darwin:25S::NOT LICENSED · Select your entire string, copy it and paste it into the "Registered User" field. (the license shown here is not a valid license. Please use the license supplied when you registered your copy of BRU Server)

BRU Server Related Software