gunzets gunzets is support software for Gunze touch screens.
Download

gunzets Ranking & Summary

gunzets Tags

support touchscreen support software Gunze touchscreen touch screens support gunzets

gunzets Description

gunzets is support software for Gunze touch screens. gunzets supports Gunze touch panels under Linux and XFree86. Supported panels are the serial, PS/2, and USB devices.All devices are supported by means of an XFree86 module, and the USB device via a kernel module as well. Both XFree version 3.3.6 and 4.x are supported, as well as kernel 2.2 and 2.4. The driver is supported by Gunze USA.Limitations:· Debouncing is only supported for XFree 4.0 (not 3.3.6).· A bounce event breaks smoothing processing· Support for multi-screen operation is not supported.CompilingIn order to successfully load the module you need to have the following facilities compiled in your kernel or loaded as modules:· usb generic support (usbcore.o)· a usb host controller driver (usb-ohci.o o usb-uhci.o)· support for misc devices like the ps2 mouse (misc.o)· the input mechanism (input.o) To compile the driver just make. If your 2.4 or 2.2 kernel headers are not available from /usr/src/linux/include then specify KERNELDIR to point to your kernel source directory, either on the make command line or in the environment. For example:make KERNELDIR=/usr/src/linux-2.4To load the driver, use insmod:insmod ./gunzets.oTo use the input mechanism, specify it on the command line:insmod ./gunzets.o use_input=1To automatically create the entry point in /dev (needed if you are not using the input mechanism) run the gunzets_load script instead:./gunzets_loadInstllationTo install the module to the proper places you can run make install. You may also wish to copy gunzets_load from /usr/local/bin to /etc/rc.d/init.d or /etc/init.d and create a proper symbolic link for automatic load at boot.

gunzets Related Software