NetSplitter NetSplitter is a ( user-level ) network load-balance.
Download

NetSplitter Ranking & Summary

NetSplitter Tags

transparent proxy proxy load TCP connection load balance balance

NetSplitter Description

NetSplitter is a ( user-level ) network load-balance. NetSplitter is a ( user-level ) network load-balance. It is like a transparent-proxy and will balance ( output ) TCP connections on multiples links.Linux NAT add/remove code is incomplete. NetSplitter will use the system() function to run the 'iptables' to handle this.Step 1) IPTABLESTell Iptables redirect packets. netfilter will intercept the data.iptables -t nat -A PREROUTING -i eth0 -p tcp -s 192.168.2.0/24 -j DNAT --to-destination 192.168.2.1:5122Or use any rule you want. just like a transparent proxy to proxy 5122.eth0 is the LAN interface192.168.2.0/24 is the LAN address192.168.2.1:5122 is the netsplitter address and port.!! DONT FORGET TO ADD UDP AND ICMP NAT CONFIGURATION !!- OPTIONALLOCAL-NATIn your iptables rulez:iptables -t nat -A OUTPUT -p tcp --sport 1024:4999 -j DNAT --to-destination 192.168.1.1:5122where 1024-4999 are the values in /proc/sys/net/ipv4/ip_local_port_range.and 192.168.1.1 is the netsplitter address.Step 2) File ConfigurationConfig File: /etc/netsplitter.confINTERFACE eth0 200.161.76.110 256 INTERFACE eth1 200.212.76.185 256 INTERFACE eth2 200.200.200.200 256 PING 1.1.1.1PING 2.2.2.2where: is a internet network link Is the eth0 network address. link speed, in kbps. A IP address that response to ping. NetSplitter will use this to check if a link is up or down.What's New in This Release:· 20021115 - Linux and BSD working

NetSplitter Related Software